Turn your product presentation or food presentation into a visceral experience
This conveyor-belt system is suitable for moving product presentations and food presentations. Place your food, drinks or products on the catwalk and have them move through your restaurant, showroom or store. Your products are guaranteed to attract attention. The conveyor belt is only 7 cm high. With its slim display belt and black side finish it’s a sleek design. The optional LED lighting gives the conveyor a futuristic appearance and will attract even more attention!
Presenting products on the conveyor belt
The presentation platters are Ø 14 cm. If needed, the product you wish to display may be somewhat bigger, as long as its centre fits on the presentation platter. Pre-Motion also offers longer presentation platters of 35 cm. Especially for slightly larger products like shoes.
The Catwalker Single Lane has a Ø 14 cm presentation platter every 18 cm. It’s up to you whether you want to fill the entire display conveyor with a presentation platter every 18 cm. If you do, there will be about 2 cm distance between presentation platters.
You may also opt to have fewer platters go around on the conveyor belt. With 1 presentation platter every 36 cm, for instance. This way, there will be about 20 cm distance between presentation platters.
Incorporating the Catwalker into your space
Determine the ideal layout of your space and draw the route of the conveyor belt in your plan. Can’t make it fit with our standard-length modules? Order one straight piece made to size. We charge slightly extra for this. Curved modules of deviating size require custom work; making a curved module to size is more complicated and therefore considerably more expensive.
Combining the conveyor belt with furniture
The conveyor belt is only 7 cm high and does not require a complicated support structure. Simply place the Catwalker on top of your bar or table; any stable surface will do. All that’s required is a small recess in your furniture where the motor will be. You may also mount the conveyor belt flush with your furniture. This way, only the top surface will be visible!
Concept idea: have the Catwalker enter your restaurant or showroom from behind a wall.
Personal advice
Questions about this product? Feel free to contact Pre-Motion.
Rather buy a mobile conveyor belt, or rent a display conveyor? Check out the mobile version for sale or the rental version.
Installation and operation
Pre-Motion will deliver and install the conveyor belt at your location. When we come to install the conveyor, it’s important your furniture is ready for installation. The Catwalker can be mounted on top of your furniture or flush with its surface. Important: the furniture must be flat and mustn’t bend under the weight.
Depending on the size of the conveyor belt, there will be 1 or more motors underneath. These small motors are noiseless, so they won’t annoy people. The underside of the conveyor belt is flat, only the motor sticks out. The motor sticks out approximately 20 centimetres under the display conveyor. Make a small recess in your furniture and the motor will be invisible for your guests/visitors! Beware: Avoid completely closing in the motor, as it needs proper ventilation. Hanging it unobstructed in an empty piece of furniture will usually work fine.
Photo: underside of conveyor belt with motor
The Catwalker requires a 230 V power outlet. With the included control box the conveyor belt can be operated (start, stop and speed). This box measures 30 x 20 x 8 cm. From the control box a single cable runs to the motor(s) underneath the conveyor belt. Optional LED lighting in the sides will require an additional 230 V power outlet.
Photo: control box
Combining standard modules
Pre-Motion offers standard conveyor-belt modules. By combining straight modules and curves, you can create your own Route Around. The basic set consists of 4 curves and 2 straight pieces. Between these 6 modules you can add all kinds of straight and curved modules. This way you can create very flexible routes of up to 70 metres!
The conveyor belt is 7 cm high and 18 cm wide. Available lengths:
- Straight parts: 50 cm, 75 cm, 100 cm, 150 cm and 200 cm. We can manufacture a straight connecting piece to size, in case you can’t get things to fit with the standard-length modules. We charge slightly extra for this.
- Curved pieces: 25 cm, 50 cm, 75 cm and 100 cm.
Tailor-made sushi conveyor belt
Are you looking for a Route Around of deviating dimensions? At extra cost we also offer tailor-made display conveyors.
€ 4,000 - € 7,000
Starting at: €27,445,-
Starting at: € 4,845.-